65 95... Removing and installing/replacing intercom system inside speaker (Security)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove PEDAL ASSEMBLY TRIM .

NOTE: Intercom system speaker is installed in pedal assembly trim.

Screw on threaded ring (1) in direction of arrow, disconnect cable, remove intercom system speaker (2).

Fig 1: Identifying Threaded Ring And Intercom System Speaker

Courtesy of BMW OF NORTH AMERICA, INC.

When replacing pedal assembly trim:

Cut through insulating mat at line (1) and remove.

Fig 2: Identifying Insulating Mat Cut Line

Courtesy of BMW OF NORTH AMERICA, INC.

Drill opening (1) for intercom system speaker at marked point.

Dimension a = 140 mm

Dimension b = 100 mm

Dimension c = dia. 38 mm

Fig 3: Identifying Drill Opening For Intercom System Speaker At Marked Point

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Carry out function check of intercom system.