86 10... Removing wheel bearing: Installation

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Replace expanded or damaged snap rings (1). Ensure correct seating.

Fig 1: Removing Snap Rings

Courtesy of BMW OF NORTH AMERICA, INC.

Press out wheel bearing with special tool 24 1 010.

CAUTION: Do not reuse old wheel bearing.

Fig 2: Pressing Wheel Bearing Using Special Tool 24 1 010

Courtesy of BMW OF NORTH AMERICA, INC.

Place new wheel bearing (1) with lathe-turned end (2) in center of bore in brake drum (3).

Before pressing in new wheel bearing, check bearing seat for possible damage.

Make sure wheel bearing is not tilted when pressed in.

Fig 1: Identifying Wheel Bearing With Lathe-Turned End And Brake Drum

Courtesy of BMW OF NORTH AMERICA, INC.

Press in new wheel bearing (1) with special tool 23 2 150 and 33 1 374.

Fig 2: Pressing Wheel Bearing Using Special Tool 23 2 150 And 33 1 374

Courtesy of BMW OF NORTH AMERICA, INC.