72 14... Removing And Installing/Replacing Top Tether Eyelets For Child Seat

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Two or three Top Tether eyelets are installed, depending on the model.

Lever out covers (1) and release screws underneath.

Remove Top Tether eyelets (2).

Tightening torque: 52 24 03AZ . See REAR SEAT (NORMAL), MANUAL for specs.

Fig 1: Identifying Lever Out Covers And Top Tether Eyelets

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Ensure Top Tether eyelets (1) are in correct installation position.

It must be possible for Top Tether eyelets (1) to be tilted in the direction of head restraints (2).

Fig 2: Identifying Top Tether Eyelets And Head Restraints

Courtesy of BMW OF NORTH AMERICA, INC.