Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mini >> 2012 >> Cooper Base, 2D Hatchback, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Air Bag Restraint Systems) >> Removal & Installation >> Central Gateway Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 BMW 760Li, 2003 BMW 745i, and 2003 BMW 745Li. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove safety and information module. See SAFETY & INFORMATION MODULE  . Pull module catch down and unlock. Slightly pull central gateway module from carrier. See Figure . Disconnect central gateway module harness connectors and remove module.
  3. To install, reverse removal procedure. Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
scientia non olet · About Mike's Workshop Manuals