61 13... Inline connectors, 15-pin, System D2.5

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Carefully pull external connector (1) apart slightly in area of retaining lugs (2).

Fig 1: Pulling Apart External Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Pull internal connector (3) until limit position in direction of arrow.

Fig 2: Pulling Internal Connector Up to Limit Position

Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 press back retaining hook (4) of corresponding contact and pull out cable with contact.

Fig 3: Pressing Retaining Hook Using Special Tool (61 0 303)

Courtesy of BMW OF NORTH AMERICA, INC.