31 11 Front axle support
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - FRONT AXLE SUPPORT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Front axle support, middle, to body | R55/R56/R57/R58/R59/R60/R61 | M12 | 100 Nm | |
| 2AZ | Rear end of front axle support to body | R55/R56/R57/R58/R59/R60/R61 | M12 | 100 Nm | |
| 3AZ | Holder, front bumper, to front axle support | R55/R56/R57/R58/R59/R60/R61 | M12 | 100 Nm | |
| 4AZ | Holder, wishbone rubber mount, to front axle support | R55/R56/R57/R58/R59/R60/R61 | M14 | 165 Nm | |
| 5AZ | Holder, wishbone rubber mount, to body | R55/R56/R57/R58/R59/R60/R61 | M10 | Replace screws. | |
| Jointing torque | 59 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 6AZ | Strut front/rear on front axle support | R60/R61 | M14 | 175 Nm | |