13 51 Injection pump, control, mixture control
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - INJECTION PUMP, CONTROL, MIXTURE CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | High pressure pump | N14 | M6 (ISA screw) | Use new screws. | 11 ± 1 Nm |
| N18 | M6 (hexagon screw) | Continental high pressure pump Use new screws. |
10 Nm | ||
| N18 | M6 Fillister head bolt | Bosch high pressure pump Use new screws. |
12 Nm | ||