32 00... Moving vehicle into normal position
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Check compliance with TEST CONDITIONS , repair vehicle if necessary.
- Check vehicle interior and luggage compartment (incl. spare wheel well) for load, unload vehicle if necessary.
- Introduce DIN load (refer to TECHNICAL DATA ) into vehicle.
- Determine VEHICLE RIDE HEIGHTNOTE: If the vehicle ride height is not inside the tolerance, the vehicle must be repaired (coil spring/leakage) (refer to applicable "ride height" specifications in TECHNICAL DATA - FRONT AXLE and TECHNICAL DATA - REAR AXLE ).