64 12... Initializing Telestart hand-held transmitter
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2016 BMW 435i xDrive, 2016 BMW 435i, 2016 BMW 428i xDrive, 2016 BMW 428i, and 2015 BMW 435i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Telestart hand-held transmitter must be initialised when:
The auxiliary heater is switched on with the hand-held transmitter and at a preselected switch-on time under an ambient temperature of approx. 15 °C.
Heating can be activated directly in the Central Information Display at any ambient temperature. To do so, go to the parking function menu under direct operation and mark the auxiliary heating box.
- Hand-held transmitter is replaced
- Car Access System control unit is replaced
The auxiliary heater is switched on with the hand-held transmitter and at a preselected switch-on time under an ambient temperature of approx. 15 °C.
Heating can be activated directly in the Central Information Display at any ambient temperature. To do so, go to the parking function menu under direct operation and mark the auxiliary heating box.
NOTE:
Initialization can only be carried out with the BMW diagnosis system.
Follow instructions and specifications in procedure.
Service functions:
Follow instructions and specifications in procedure.
Service functions:
- Complete vehicle
- Body
- Air conditioning function
- Telestart transmitter
- Initialization