31 50... Check/change front axle differential oil
Special tools required:
After draining front axle differential oil or when carrying out the initial filling of a new replacement front axle differential, the transmission must be filled with 600 ml oil.
Use only the approved front axle oil in the front axle differential. See 2.0 APPROVED FINAL DRIVE OILS FOR FRONT AND REAR AXLE FINAL DRIVES WITH AND WITHOUT LIMITED SLIP OR VISCOUS COUPLING .
Failure to comply with this requirement will result in serious damage to the front axle differential!
Necessary preliminary tasks:
- Remove REINFORCEMENT PLATE .
Checking, correcting front axle differential oil level:
The front axle differential is subject to oil filling over its lifetime. An oil-level adjustment is not needed during a service. If there is a visible leakage of oil or after a repair to the front axle differential, follow the instructions in "Replacing front axle differential oil"!
Changing front differential oil:
Place oil collecting apparatus underneath.
Remove oil drain plug (1).
Tightening torque 31 50 2AZ .
Drain front axle differential oil.
Screw in oil drain plug (1) and tighten.
Undo oil filler plug (2).
Tightening torque 31 50 2AZ .
Fill 600 ml of transmission oil. (if necessary, use measuring cup and special tool 00 2 080 )
Installation note:
Renew oil drain plug (1) and oil filler plug (2).