Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mini >> 2012 >> Cooper Base, 2D Hatchback, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4088 (General Electrical System - Repair - F13) >> Control Units, Modules, Sensors, Aerials >> 61 35... Notes on ESD protection (Electro Static Discharge) >> Notes

61 35... Notes on ESD protection (Electro Static Discharge): Notes

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE: Electrical components which are particularly sensitive to electrostatic discharge (electronic control units, sensors, etc.) are marked with the ESD warning symbol.
-Electro
-Static
-Discharge
IMPORTANT: See 7060 ANTISTATIC MAT 

Statically charged persons can discharge themselves when they touch electrical components.

NOTE: Humans can only detect a discharge starting from a level of approx. 3000 V.
The danger threshold for electrical components already starts from a level of approx. 100 V.
Fig 1: Caution - Do Not To Touch Electrical Components
G04727627Courtesy of BMW OF NORTH AMERICA, INC.

Example:

Mechatronic control unit.

Fig 2: Identifying Mechatronic Control Unit
G04727628Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Do not touch pins and multi-pin connectors directly.

Touch electrical components by their housings only.

Fig 3: Caution - Do Not Touch Pins And Multi-Pin Connectors
G04727629Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: To avoid damaging or destroying electrical components as a result of electrostatic discharge, it is absolutely essential to observe the following instructions:
  • When replacing electrical components, leave the replacement components in their original packaging until immediately before they are to be installed
  • If necessary, always return a removed component in its original packaging (always pack the component away immediately)
  • Read and comply with user information on using the associated special tool 12 7 060

Personal protective equipment: 

Electrically conducting clothing (high wool content, antistatic shoes required).

These can primarily be identified by the logo on the side.

Fig 4: Identifying Antistatic Shoes
G05780043Courtesy of BMW OF NORTH AMERICA, INC.