31-1010 Tool

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0491860 311010 Tool MW

NOTE: For removing and installing the silent blocks in the trailing links and wishbones [Discontinued]

Storage Location

Y10

Consisting of:

= 0491861 Holding sleeve
NOTE: (Pressure sleeve) For pulling out - discontinued, only available as part of complete tool [Not available separately]
= 0491862 Holding sleeve
NOTE: (Pressure sleeve) For counter-holding Discontinued, only available via complete tool [cannot be ordered separately]

Fig 1: Identifying Tool (0491860)
Courtesy of BMW OF NORTH AMERICA, INC.
= 0491863 Holding sleeve
NOTE: (Pressure sleeve) For pulling in - discontinued, only available as part of complete tool [Not available separately]