86 10... Removing rest on loading ramp, left, right and center

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Before drilling out rivets, drive in rivet pins with a punch.

Drill out rivets (1). Remove rest (2) towards front.

Installation:

Stick on new sealing tape.

Fig 1: Identifying Rest On Loading Ramp And Rivets

Courtesy of BMW OF NORTH AMERICA, INC.