86 21... Removing plug for inside light

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Two different types of plugs are used for the inside light. Both types function in the same way, only their designs are different.

Type 1:

Release screw (1) and separate housing plug (2).

Fig 1: Identifying Plug With Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and disconnect cables (2) from screw clamp.

Fig 2: Identifying Cables And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Type 2:

Release screw (1) and separate housing plug (2).

Fig 3: Identifying Plug And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Remove contact parts (1+2).

Installation

When installing, make sure contact parts (1+2) are in correct installation position.

Fig 4: Identifying Contact Parts

Courtesy of BMW OF NORTH AMERICA, INC.