00 00 ... Resetting service interval indicator according to factory specifications

WARNING: This page is about a different car, the 2003 BMW Z8, 2002 BMW Z8, 2001 BMW Z8, and 2000 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 1 110

Switch on ignition.

Connect resetter (special tool 61 1 110) to diagnosis connector in engine compartment.

Resetting oil service

Press yellow button (1) for oil service.

Fig 1: Resetting Oil Service

Courtesy of BMW OF NORTH AMERICA, INC.

Green lamp (2) lights up.

Wait until yellow lamp (3) lights up and then goes out again.

NOTE: Check that oil service indicator has been reset.

Reset service

Press red button (1) for inspection.

Fig 2: Resetting Service

Courtesy of BMW OF NORTH AMERICA, INC.

Green lamp (2) lights up.

Wait until red lamp (3) lights up and then goes out again.

Turn off ignition, wait 20 seconds and repeat procedure in order to adapt interval of annual inspection to inspection.

NOTE: Check that service interval indicator has been reset.