61 31 192 Replacing Button For Controller (until 09/2008)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

00 9 317 TRIM PANEL WEDGE

Partially fit special tool 00 9 317 as illustrated.

Lever out knob for controller (1) in direction of arrow and pull off.

Fig 1: Removing Knob For Controller

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Risk of damage!

Install knob for controller only when controller is installed.

Installation:

Fit knob for controller (1) so that guides (2) are correctly seated in mountings (3).

Press knob for controller (1) in middle until it engages.

Fig 2: Pressing Knob For Controller

Courtesy of BMW OF NORTH AMERICA, INC.