61 13... In-line Plugs, 6 To 50-Pin, System Elo

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Unlock lock.

Fig 1: Unlocking Lock

G05478489

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten cable clip.

Installation:

Cable clip must be reinstalled.

Fig 2: Locating Cable Clip

G05478490

Courtesy of BMW OF NORTH AMERICA, INC.

Detach catch (1) from plug housing (2).

Fig 3: Detaching Catch & Plug Housing

G05478491

Courtesy of BMW OF NORTH AMERICA, INC.

Press out contact carrier (3) with wiring harness (4) through opening (5).

Fig 4: Pressing Carrier With Wiring Harness

G05478492

Courtesy of BMW OF NORTH AMERICA, INC.

Hold down arrester hook (6) of defective contact and pull cable and contact up to secondary lock (8).

Fig 5: Identifying Arrester Hook & Secondary Lock

G05478493

Courtesy of BMW OF NORTH AMERICA, INC.

Hold down arrester hook once again in secondary lock (8) and pull cable and contact completely out of contact carrier.

Fig 6: Pulling Cable & Contact Carrier

G05478494

Courtesy of BMW OF NORTH AMERICA, INC.