33 10 ... Removing and Installing/Replacing Vibration Damper
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 335xi, 2008 BMW 328xi, 2007 BMW 335xi, 2007 BMW 328xi, and 2006 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
Variant A:
Release screw (1).
Tightening torque 33 17 2AZ. See 33 17 REAR AXLE DIFFERENTIAL MOUNTINGS
Remove vibration damper (2).
Variant B:
Release bolt (1) and remove vibration damper (2).
Tightening torque 33 17 3AZ. See 33 17 REAR AXLE DIFFERENTIAL MOUNTINGS
Variant C:
NOTE:
Removal depicted on left vibration damper.
Release bolt (1) and remove vibration damper (2).
Tightening torque 33 17 3AZ. See 33 17 REAR AXLE DIFFERENTIAL MOUNTINGS