41 51... Removing And Installing Door

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2016 BMW 435i xDrive, 2016 BMW 435i, 2016 BMW 428i xDrive, 2016 BMW 428i, and 2015 BMW 435i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Do not damage adjoining body components.

The graphics are schematic representations and are to be applied to the relevant vehicle type.

Open door.

Pull the lock (1) up and disconnect plug connection.

NOTE: Secure door against closing.

Release screw (1) on door stop.

Front door:

Tightening torque: 51 21 3AZ .

Fig 1: Pulling Door Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Open door up to limit position.

Release screws between both hinge elements at top and bottom.

Front door:

Tightening torque 41 51 1AZ .

Unhinge door by moving upwards and placing it on a suitable surface.

Installation note:

If necessary, adjust DOOR .

Fig 2: Door Hinge Elements Screws

Courtesy of BMW OF NORTH AMERICA, INC.