33 32 153 Removing and installing/replacing front compression strut
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
Driving without compression struts is not permitted!
Necessary preliminary tasks:
Release screws (1).
Tightening torque 33 33 2AZ .
Release screw (3).
Tightening torque 33 33 2AZ .
Release screw (2) and remove compression strut (4).
Secure rear axle carrier by inserting screw (2).
Installation:
Check threads for damage; if necessary, repair with HELICOIL THREAD INSERTS .
Tightening torque 33 33 1AZ .