33 32 153 Removing and installing/replacing front compression strut
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
Driving without compression struts is not permitted!
Driving without compression struts is not permitted!
Necessary preliminary tasks:
- Remove trailing link to rear axle. (F07/F11/F12)
Release screws of underbody panelling (1).
Remove underbody panelling (1).
Release screws (1).
Tightening torque 33 33 2AZ .
Release screw (2) and remove compression strut (3).
Tightening torque 33 33 1AZ .
IMPORTANT:
Secure rear axle support by inserting screw (2).
Installation note:
Check threads for damage; if necessary, repair with HELICOIL THREAD INSERTS .