32 00... Moving vehicle into normal position
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Check compliance with TEST CONDITIONS , bring vehicle to a stop if necessary.
- Version with air spring system: Carry out ride-height calibration
- Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary Introduce DIN load (refer to TECHNICAL DATA ) into vehicle
- Determine NOTE: If the vehicle ride height is not inside the tolerance (refer to Technical Data See REAR AXLE - RIDE HEIGHT ; REAR AXLE - RIDE HEIGHT E90 ; FRONT AXLE - RIDE HEIGHT or FRONT AXLE - RIDE HEIGHT ), the vehicle must be repaired (coil spring/leakage).