6113... Crimping Micro Power Quadlock contacts (MPQ): Notes
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
To crimp MPQ contacts, use pliers 61 4 321 (1) in conjunction with crimping head 61 4 325 (2) from crimping set 61 4 320 .
NOTE:
Pliers (1) open automatically as far as they will go when handles are pressed together.
Open pliers (1).
NOTE:
Place contact (2) with utmost care in designated nest (observe cable cross-section) in crimping head (3). Make sure it is exactly positioned.
Place MPQ contact (2) in crimping head (3).
Close pliers (1) one notch.
NOTE:
Follow procedure for CUTTING AND STRIPPING INSULATION from cables.
Insert stripped cable (2).
Close pliers (1) fully.
Open pliers (1) and remove cable (2).