61 13... Crimping Micro Power Quadlock contacts (MPQ)
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
To crimp MPQ contacts, use hand pliers 61 4 321 (1) in conjunction with crimping head 61 4 325 (2) from crimping set 61 4 320 .
NOTE:
Hand pliers (1) open automatically as far as they will go when handles are pressed together.
Open hand pliers (1).
NOTE:
Place contact (2) with utmost care in designated nest (observe line cross-section) in crimping head (3). Make sure it is exactly positioned.
Place MPQ contact (2) in crimping head (3).
Close hand pliers (1) one notch.
NOTE:
Follow procedure for CUTTING AND STRIPPING INSULATION
from cables.
Insert stripped cable (2).
Close hand pliers (1) fully.
Open hand pliers (1) and remove cable (2).
IMPORTANT:
Check contact for correct crimping.