Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2715 (Steering And Wheel Alignment - Repair - F01/F02) >> Electronic Chassis Alignment >> 32 00... Test conditions for chassis/wheel alignment check

32 00... Test conditions for chassis/wheel alignment check

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Observe the following test conditions prior to the chassis/wheel alignment check:

  1. Correct and identical wheel rim and tire sizes.
  2. Correct tread depth. The tread depth for each axle may differ from left to right by max. 1_2 mm.
  3. Correct tire pressure (see label on vehicle).
  4. All chassis and suspension components must be technically OK.
  5. Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
  6. Vehicles with self-levelling suspension: Pull fuse of air supply system so that there is no controlling down or up.
scientia non olet · About Mike's Workshop Manuals