1.2 Removing Sealing Materials

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Hydrochloric acid is created when PVC sealing material is heated to temperatures in excess of 180°C.
Remove PVC sealing material with a rotating wire brush only or heat material with a hot air blower to max. 180°C and remove with a spatula.
Ensure that all enclosed areas are well ventilated or are provided with direct extractor facilities.