10.3 Display Support
WARNING: This page does not describe the selected car, but rather 228 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2012 BMW 750i, 2012 BMW 750Li, and 2011 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
- Measured values with a setpoint/actual comparison and tolerance bar (setpoint figures can be displayed with the "F" key).
- Steering graphics for steering routines.
- Overview of measured values with current setpoint/actual comparison
- Rim run-out compensation.
- With all other functions (e.g. customer input), the title illustration appears on the LCD display.
If the data transmission from the remote control to the computer is interrupted, the remote control icon in the bottom right-hand corner of the screen changes color from green to red and the illustration on the LCD display is shown inversely - black turns to white, white to black. This change does not take place in the title illustration. Once the line-of-sight connection has been re-established, the remote control continues to operate from the point of interruption in the program. A continuous visual connection during alignment is therefore not necessary.
- The "Hour glass" icon in the LCD display means: "Please wait".
- The "Battery" icon in the top right-hand corner of the LCD display means that the battery reserve has been reached.
- To switch off the remote control: press the "F" key for 5 seconds, then return it to its charging unit or connect it to a charge cable. The title illustration will again appear as a charging check.
- If, during the measurement, the remote control has been placed back in the charging unit, it must be switched on again using the "ON" button.