Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1030 (Wheel And Tires - Service Information) >> Kinematic Diagnosis System And Environment >> 10. Control Modification (Menu) >> 10.1 Remote Control With Display

10.1 Remote Control With Display

WARNING: This page does not describe the selected car, but rather 228 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2012 BMW 750i, 2012 BMW 750Li, and 2011 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

The following steps show how the remote control with display is activated:

  1. Call up the "Service" menu in special functions ("S" key)
  2. Call up the "Remote control" sub-menu in the "Service" menu.
  3. Select the "Remote control with display" item in the "Remote control" sub-menu - this configuration is retained.

IMPORTANT: In the case of equipment without remote control, this must be configured to "No remote control".