Coding Fails After Replacing The FRM (M61 03 09)
Publication date: 2009-10-12Reference number: M61 03 09
CODING FAILS AFTER REPLACING THE FRM
TECHNICAL SERVICE BULLETIN
Reference Number(s): SI M61 03 09, Date of Issue:
October 12, 2009
| MINI: | R55 (Cooper Clubman, Cooper S Clubman); R56 (Cooper, Cooper S); R57 (Cooper and Cooper S Convertible); Vehicles produced from August 31, 2009 to December 30, 2009 |
| GROUP: | General Electrical Systems |
SUBJECT
Coding Fails After Replacing the FRM
SITUATION
After replacing the FRM3 (Footwell control module), the module fails coding at the first attempt.
CAUSE
Coding data error in ISTA/P 2.35.x.
The coding data file is expected to be corrected with ISTA/P 2.36.0 in December 2009.
CORRECTION
Code the FRM3 a second time. For information on programming and coding with ISTA/P, refer to Centernet/Aftersales Portal/Service/Workshop Technology/Vehicle Programming.
WARRANTY INFORMATION
Covered under the terms of the MINI New Vehicle Limited Warranty.
WARRANTY INFORMATION
| Defect Code: | 61 38 06 02 00 | |
|---|---|---|
| Labor Operation: | Labor Allowance: | Description: |
| Refer to KSD | Refer to KSD | Code FRM3 control module |