Battery Discharge With Key Inserted In Ignition Lock (M61 200 04)
Publication date: 2006-10-05Reference number: M61 200 04
Supersedes refnos: M61 13 06
BATTERY DISCHARGE WITH KEY INSERTED IN IGNITION LOCK
TECHNICAL SERVICE BULLETIN
| MINI: | R50 (Cooper), R53 (Cooper S) |
| GROUP: | General Electrical Systems |
SUBJECT
Battery Discharge with Key Inserted in Ignition Lock
SITUATION
There is a possibility of the battery eventually discharging if the driver leaves the vehicle parked up for a long period without removing the key from the ignition lock completely.
CAUSE
If the key is not removed from the ignition lock completely (semi-removed status), there is a critical distance between the key and the ring antenna where the EWS will detect statuses permanently changing between "key inserted" and "key removed". This will result in a permanent closed circuit current of approximately 800mA.
PROCEDURE
In the event of a complaint, explain to customer that he should either leave the key fully in the ignition lock or remove the key from the ignition lock completely.
Parts replacement does not provide a remedy.