DTC P0A23: Generator Torque Sensor Circuit Range/Performance
P0A23 - GENERATOR TORQUE SENSOR CIRCUIT RANGE/PERFORMANCE
| Description: The powertrain control module (PCM) checks the amount of the generator motor torque delivered, by monitoring the frequency of the torque of generator AC (TGAC) signal. This DTC indicates the TGAC signal is out of expected range. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Monitor the PCM GTQ_CMD PID. The PID value should be 0 Nm (0 lb ft) in PARK or NEUTRAL if the brake pedal is not applied. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TC . | ||