Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2009 >> Sable Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1232 (Anti-Lock Brake System) >> Removal And Installation >> Stability/Traction Control Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Depress the 4 tabs and remove the stability/traction control switch from the instrument panel center finish panel.
    3. Fig 1: Identifying Tabs
    GF0045803Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals