Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2009 >> Sable Base, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Climate Control System >> Removal And Installation >> In-Vehicle Temperature Sensor >> Removal And Installation

Removal And Installation

Taurus/Sable 

  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.

    2. Taurus X 

  2. Remove the 3 lower steering column cover screws.
  3. Remove the lower steering column cover.
  4. Remove the 3 lower steering column shroud screws.
  5. Remove the lower steering column shroud.
  6. Disconnect the in-vehicle temperature sensor electrical connector.

    7. All vehicles 

  7. Remove the in-vehicle temperature sensor.
  8. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals