Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2009 >> Sable Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1197 (Information System And Entertainment Systems) >> Removal And Installation >> Audio Input Jack >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor shifter trim ring by pulling straight up to disengage the clips.
  2. Remove the front floor console center finish panel by pulling straight up to disengage the clips.
  3. Release the tabs and remove the audio input jack.
    • Disconnect the electrical connector.
    4. Fig 1: Identifying Tabs On Audio Input Jack
    GF0028026Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals