Driver Seat Module - Memory Seat

NOTE: The memory seat track position sensors are integral to the memory seat track motors. The memory seat track motor electrical connectors will connect to a seat track without the memory option. Make sure the correct seat track is being installed.

The power driver seat, power outside rear view mirrors and power adjustable pedals (if equipped) are controlled by the driver seat module (DSM) if the vehicle is equipped with the programmable/recall memory option. The DSM is located underneath the driver seat.

This system allows automatic positioning of the driver seat, power outside rear view mirrors and power adjustable pedals (if equipped) to 2 programmable positions. Memory positions can be stored at any time. A memory recall can be initiated only if the vehicle is in PARK or NEUTRAL gear and the ignition switch is not in START. A memory recall in progress will not be affected by moving the ignition switch to START or by moving the gearshift lever out of PARK or NEUTRAL. For information on programming memory positions or recalling a stored memory position, refer to Memory Position Programming .