Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1672 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Keyless Entry Keypad >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH front door trim panel. For additional information, refer to INTERIOR TRIM & ORNAMENTATION article.
  2. Position the watershield aside.
  3. Disconnect the electrical connector.
  4. Remove the clip and the keyless entry keypad.
  5. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals