Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1265 (Engine System - General Information) >> General Procedures >> Connecting Rod Large End Bore

Connecting Rod Large End Bore

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the SPECIFICATIONS .
  1. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
    2. Fig 1: Measuring Connecting Rod Large End Bore
    G03946845Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals