Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1197 (Information System And Entertainment Systems) >> Removal And Installation >> Satellite Digital Audio Receiver System (SDARS) Module >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

Wagon 

  1. Remove the RH quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.

    2. Sedan 

  2. Remove the LH luggage compartment trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.

    3. All vehicles 

  3. Remove the 4 bolts or 3 nuts and remove the Satellite Digital Audio Receiver System (SDARS) module.
    • Disconnect the satellite radio antenna cable electrical connector.
    • Disconnect the SDARS module jumper harness.
    • To install, tighten to 7 Nm (62 lb-in) (sedan only).
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals