Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1179 (Handles, Locks, Latches And Entry Systems) >> General Procedures >> Keyless Entry Keypad Code Programming >> Erasing a Personal Entry Code

Erasing a Personal Entry Code

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enter the factory set 5-digit keyless entry keypad code.
  2. Within 5 seconds, press the 1/2 button on the keypad and release.
  3. Within 5 seconds, press and hold the 1/2 button for 2 seconds.
  4. All personal codes are now erased and only the factory set 5-digit code will work.
scientia non olet · About Mike's Workshop Manuals