Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1013 (Seat System) >> Removal And Installation >> Seat Control Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For component identification and locations, refer to Seat - Exploded View, Front .
  1. Remove the recliner handle cover.
  2. Remove the seat control switch knob.
  3. Remove the outboard side shield.
    • Remove the 3 screws and detach the side shield.
    • Disconnect the seat control switch electrical connector.
  4. Remove the knob and seat control switch.
  5. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals