Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2008 >> Sable Base, FWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information System And Entertainment Systems >> Removal And Installation >> Steering Wheel Controls >> Removal And Installation

Removal And Installation

  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM article.
  2. Remove the 2 screws and the steering wheel controls.
    • Disconnect the electrical connector.
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals