Removal And Installation
WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MKZ
- Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM article.
- Remove the 4 screws and the steering wheel control bezel.
- Remove the speed control switch by pulling the switch toward the rear of the vehicle.
- Disconnect the electrical connector.
- Remove the steering wheel controls bezel, if equipped.
- To install, reverse the removal procedure.
All vehicles