Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2006 >> Montego Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle - 6 Speed) >> In-Vehicle Repair >> Transaxle Support Insulator >> Removal

Transaxle Support Insulator: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the 2 bolts for the rear transaxle mount.
    Fig 1: Locating Rear Transaxle Mount
    G04657350Courtesy of FORD MOTOR CO.
  3. Install a suitable transmission jack to support the transaxle.
  4. Remove the upper transaxle mount bolts and remove the mount.
Fig 2: Locating Upper Transaxle Mount Bolts
G04657351Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals