Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2006 >> Montego Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal And Installation >> Speed Control Switch >> Removal and Installation

Removal and Installation

  1. Remove the driver air bag module. For additional information, refer to REMOVAL .
  2. Remove the 2 screws and remove the speed control switch.
    • Disconnect the electrical connector.
    • To install, tighten to 7 N.m (62 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals