Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2005 >> Montego Base, AWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Column Switches >> Removal And Installation >> Multifunction Switch >> Removal and Installation

Removal and Installation

  1. Remove the steering wheel. For additional information, refer to STEERING COLUMN .
  2. Remove the instrument cluster finish panel and the steering column upper shroud as an assembly.
    • Remove the 2 instrument cluster finish panel screws.
    • Press the sides of the upper steering column shroud inward to release it from the lower steering column shroud.
  3. Remove the 3 lower steering column shroud screws and the lower shroud.
  4. Disconnect the 3 electrical connectors.
  5. Remove the 4 screws and the multifunction switch.
  6. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals