Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2003 >> Marauder >> Repair and Diagnosis >> External Pages >> Different car >> Section 447 (Cruise Control System) >> Removal And Installation >> Speed Control Deactivator Switch >> Removal

Speed Control Deactivator Switch: Removal

WARNING: This page is about a different car, the 2004 Mercury Marauder, 2004 Mercury Grand Marquis, and 2004 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the speed control deactivator switch.
    1. Rotate counterclockwise and remove the speed control deactivator switch.
    2. Disconnect the electrical connector.
    Fig 1: Disconnecting Electrical Connector
    G02758349Courtesy of FORD MOTOR CO.