Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2003 >> Marauder >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System-General Information >> General Procedures >> Fuel Line Fittings - Push Connect >> Connect

Fuel Line Fittings - Push Connect: Connect

    NOTE: Lubricate the tube end with clean engine oil to ease assembly.
    Fig 1: Aligning Tube To Fitting
    G03453865Courtesy of FORD MOTOR CO.
  1. Align the tube to the fitting and push until a click is heard.
  2. Pull on the fitting to make sure it is fully engaged, then install the safety clip.
    Fig 2: Pulling On Fitting To Make Sure It Is Fully Engaged
    G03453866Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals