Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2002 >> Villager Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Anti-Lock Brake System - Anti-Lock Control - 4-Wheel) >> Removal And Installation >> Sensor Indicator - Front >> Installation

Sensor Indicator - Front: Installation

WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The front brake anti-lock sensor indicator must be pressed on straight.
  1. Use an appropriate size cylinder and press to install the front brake anti-lock sensor indicator.
    Fig 1: Installing Front Brake Anti-Lock Sensor Indicator
    G01947885Courtesy of FORD MOTOR CO.
  2. Install the front disc brake rotor; refer to DISC & DRUM .
scientia non olet · About Mike's Workshop Manuals