Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2002 >> Villager Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> General Procedures >> Flushing >> Special Tool(s)

Special Tool(s)

Fig 1: Identifying Special Tool(s)
G03412139Courtesy of FORD MOTOR CO.
  1. Remove the thermostat. Refer to THERMOSTAT .
  2. Install the water thermostat housing without the thermostat.
  3. Use cooling system Flush-All, Flush Kit Hardware Package and Drain Kit to flush the engine and radiator.
  4. Install the thermostat. Refer to THERMOSTAT .
  5. Backflush the heater core. If necessary, refer to BACKFLUSHING .
scientia non olet · About Mike's Workshop Manuals