Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2000 >> Villager Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Wheel Alignment Specifications & Adjustment Procedures - Specifications & Procedures -- Trucks) >> Wheel Alignment Procedures >> Toe-In Adjustment >> All Other Models

All Other Models

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1999 Mercury Villager, 1999 Mercury Mountaineer, 1999 Lincoln Navigator, 1999 Ford Windstar, and 1999 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure toe-in with front wheels straight-ahead, and steering wheel locked in centered position. Adjust toe-in by loosening clamps and adjusting sleeve to obtain correct specification. Maintain steering wheel in centered position.
  2. If steering wheel is not centered prior to wheel alignment, determine which wheel assembly is out of adjustment, and compensate that side to center steering wheel. Multiple attempts may be necessary to properly center steering wheel.
  3. When tightening clamps, ensure clamp bolts are positioned so there will be no interference with other parts throughout entire travel of steering linkage.
scientia non olet · About Mike's Workshop Manuals